Quantitative Assay of Peracetic Acid in Disinfectant “Delakson” by Cathodic Voltammetry

Main Article Content

Svitlana P. Karpova

Abstract

Objective: The electrochemical behavior of peracetic acid (PAA) in disinfectant “Delakson†has been studied. Materials and Methods: “Delakson†disinfectant is a sample preparation, which was used for the analysis. A new voltammetric method for the quantitative determination of PAA in “Delakson†disinfectant at the carbositall rotating electrode (CE) in the interval of potential +1.0…–1.0 V (the reference electrode Ag, AgCl/KСl [sat]) (Ep = +0.15 V) was proposed. Results: It has been experimentally proved that height of PAA reduction peak decreases and the reduction peak potential is shifted toward more electronegative values with the background electrolyte pH increasing from 2.15 to 4.78. The optimum pH for analysis is approximately 3.6. The linear relationship has been observed in the PAA concentration range 3.12–12.50 × 10–5 mol/L, the calibration curve equation was IÑ€ = (3.78 ± 0.46) × 103Ñ (r = 0.995). Determining PAA in the work solution with the relative standard deviation (RSDs) were 0.035–0.022 (δ = +0.30... +0.90%); limit of detection = 1.19 × 10–6 mol/L, and limit of quantification = 3.97 × 10–5 mol/L. Determining PAA in the test solution of “Delakson†disinfectant with the concentrations of 0.1% the RSD was 0.024 (δ = +0.9%). Conclusions: Thus, new voltammetric method of PAA determination in “Delakson†disinfectant at CE has been developed and the possibility of its quantitative determination has been shown.

Downloads

Download data is not yet available.

Article Details

How to Cite
Karpova, S. P. (2018). Quantitative Assay of Peracetic Acid in Disinfectant “Delakson” by Cathodic Voltammetry. Asian Journal of Pharmaceutics (AJP), 12(03). https://doi.org/10.22377/ajp.v12i03.2639
Section
ORIGINAL ARTICLES